A fast economical all position metal working electrode that does not require any special equipment other than standard welding machines. Specially formulated coatings concentrate the voltage force at the point of application. This expedites the removal of metals that are normally difficult to torch cut, such as castiron,stainless steel, and high alloys.
Use for chamfering, beveling and gouging of ferrous and non-ferrous metals. Examples include: weld preparations, implementing engineering changes, removal of old welds, cracks, frozen bushings and pins, and the flash and risers on castings.
Use AC or DC, straight polarity with a high amperage setting. Electrode should be pointing in direction of travel, at an angle between approximately 15° and 35° to the work piece. Initiate the arc and move in a forward motion along the area to be removed. Repeat operation to obtain desired depth. CARVER 9100 cuts a groove the width of the outside diameter of the electrode and leaves a clean path.
| ELECTRODES | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| SIZE(MM) | 3.15 | 4.00 | 5.00 | ||||||
| AMPS | 250-280 | 300-400 | 350-450 | ||||||